309/309S/309H, 1.4833

SX 309 Technical Data

Summary

SX 309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance, high temperature strength and creep resistance.  The lower nickel content of SX309 improves resistance to sulphur attack at high temperatures.  It is tough and ductile, and can be readily fabricated and machined.  SX 309S is the low-carbon version of SX 309, and is recommended for applications where sensitisation, and subsequent corrosion by high temperature gases or condensates during shutdown may pose a problem.

Typical Applications
SX 309 / 309S is used exclusively for its high temperature oxidation resistance.  It is common for SX 309, 310 and 321 to be used in the same piece of equipment in the various temperature regions.

 

SX

C

Mn

P

S

Si

Cr

Ni

309
309S

0.20 max
0.08 max

2.00
max

0.045
max

0.030
max

1.00
max

22.0 -
24.0

12.0 -
15.0

 

SX

C

Mn

P

S

Si

Cr

Ni         N

1.4833 

0.15max

2.00
max

0.045
max

0.015
max

1.00
max

22.0 -
24.0

12.0 -  0.11 
15.0    max     


Typical Properties in the Annealed Condition
The properties quoted in this publication are typical of mill production and unless indicated should not be regarded as guaranteed minimum values for specification purposes.

 

 Mechanical Properties at Room Temperature 
  Tensile Stength                                    MPa     min515

    Proof Stress (0.2% Offset)                    MPa     min205

    Elongation  (Percent in 50 mm)            longitudinal  35%       transverse  25%

 

 

We have products:

seamless pipe,seamless tube,

 welded pipe,welded tube,

pipe fitting,flange


Complete inspection equipment and quality system.
Eddy current test, Ultrasonic detector, hydraulic test equipment, Universal testing machine, Arldirect-reading spectrometer...... Recently we have replaced a new set of advanced PMI equipment, OXFORD INSTRUMENTS X-MET7000
Read More
Advanced equipment and technological process.
We have 5 bright annealed furnace with 30 mtrs in length, the highest temperature can reach 1350℃, and the tolerance between the set and real temperature could be within 2℃, and it ensures the mechanical properities and the quality of the pipe surface.
Straightening Machine, this equipment can ensure the straightness of our big OD pipes
More >>
Contact
Facebook/Cindy twitter/Cindy linkedin/Cindy skype/cindydu82
E-Mail:
mt@mtstainlesssteel.com
Tel:
+86-573-82626532
+86-573-82626531
+86-573-82717867
Fax:
+86-573-8271 8785
Download The Catalogue
Copyright © 2013 Jiaxing MT stainless steel co.,ltd. (MTSCO) All Rights Reserved. / Powered By Supplierlist.com