Alloy C-4, UNS N06455

 Alloy C-4 Chemical compostion:

Alloy

%

Ni

Cr

Mo

Fe

C

Mn

Si

Co

S

P

Ti

C-4

Min.

65

14

14  

 

       

 

 

Max.

 

18

17

3.0

0.01

1.0

0.08

2.0

0.010

0.025

0.70

 

 

Alloy C-4 Physical properties:

Density

8.64 g/cm3

Melting point

1350-1400 ℃

 

 

Alloy C-4 Alloy minimum mechanical properties in the room temperature:
Alloy
Tensile strength
Rm N/mm2
Yield strength
RP0.2N/mm2
Elongation
A5 %
C-4
783
365
55

Alloy C-4 alloy is a nickel-chromium-molybdenum alloy with outstanding
high-temperature stability as evidenced by high ductility and corrosion resistance even
after aging in the 1200 to 1900°F (649 to 1038°C) range. This alloy resists the formation
of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable
for most chemical process applications in the as-welded condition. C-4 alloy also
has excellent resistance to stress-corrosion cracking and to oxidizing atmospheres up to
1900°F (1038°C).

Alloy C-4 alloy has exceptional resistance to wide variety of chemical process
environments. These include hot contaminated mineral acids, solvents, chlorine
and chlorine contaminated media (organic and inorganic), dry chlorine, formic and
acetic acids, acetic anhydride, and seawater and brine solutions.


Alloy C-4 alloy can be forged, hot-upset, and impact extruded. Although the
alloy tends to work-harden, it can be successfully deep-drawn, spun, press formed or
punched. All of the common methods of welding can be used to weld Alloy C-4
alloy, although the oxy-acetylene and submerged arc processes are not recommended
when the fabricated item is intended for use in corrosion service. Special precautions
should be taken to avoid excessive heat input.


Complete inspection equipment and quality system.
Eddy current test, Ultrasonic detector, hydraulic test equipment, Universal testing machine, Arldirect-reading spectrometer...... Recently we have replaced a new set of advanced PMI equipment, OXFORD INSTRUMENTS X-MET7000
Read More
Advanced equipment and technological process.
We have 5 bright annealed furnace with 30 mtrs in length, the highest temperature can reach 1350℃, and the tolerance between the set and real temperature could be within 2℃, and it ensures the mechanical properities and the quality of the pipe surface.
Straightening Machine, this equipment can ensure the straightness of our big OD pipes
More >>
Contact
Facebook/Cindy twitter/Cindy linkedin/Cindy skype/cindydu82
E-Mail:
mt@mtstainlesssteel.com
Tel:
+86-573-82626532
+86-573-82626531
+86-573-82717867
Fax:
+86-573-8271 8785
Download The Catalogue
Copyright © 2013 Jiaxing MT stainless steel co.,ltd. (MTSCO) All Rights Reserved. / Powered By Supplierlist.com