English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
ASTM A269 / ASME SA269 Small Diameter 1.4306 / 1.4404 Stainless Steel Heat Exchanger Welded Tube
SSHEWT06
Material: 304, 1.4301, X5CrNi18-10; 304L, 1.4306, S30403, 1.4307; 316L, 1.4401, 1.4404, 1.4435; 309/309S/309H, 1.4833;
Get Quote
ASTM A269 / ASME SA269 Small Diameter 1.4306 / 1.4404 Stainless Steel Heat Exchanger Welded Tube
MTSCO heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products .
| Process : |
| 1 . We use Cold Drawn techonology to produce U bend tube |
| 2 . U bend tubes produce will accordance to customer's drawings |
| 3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at the required flow rate |
| 4 . The radius is checked for its OD and wall thinning with the recommended specification |
| 5 . We'll choose three different position or as customer's require to make sure tubes quality . We'll do physical properties and micro-structure test |
| 6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test |
| 7 . Each tube is then hydro tested at the recommended pressure to check for leakage |
Chemical Composition
| C(max) | Si(max) | P(max) | S(max) | Cr | Ni | Mo | Ti | |
| TP304/1.4301 | 0.080 | 1.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-10.5 | ||
| TP304L/1.4307 | 0.035 | 1.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-12.0 | ||
| TP304H/1.4948 | 0.04-0.10 | 1.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-12.0 | ||
| TP316/1.4401 | 0.080 | 1.00 | 0.045 | 0.030 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |
| TP316L/1.4404 | 0.035 | 1.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | |
| TP316Ti/1.4571 | 0.080 | 1.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) |
| TP321/1.4541 | 0.080 | 1.00 | 0.045 | 0.030 | 17.0-19.0 | 9.0-12.0 | 0.7>5x(C+N) | |
| TP317L/1.4449 | 0.080 | 1.00 | 0.045 | 0.030 | 18.0-20.0 | 11.0-14.0 | 3.0-4.0 | |
| TP347H/1.4912 | 0.04-0.10 | 1.00 | 0.045 | 0.030 | 17.0-19.0 | 9.0-13.0 | ||
| TP309S/1.4833 | 0.080 | 1.00 | 0.045 | 0.030 | 22.0-24.0 | 12.0-15.0 | 0.75 | |
| TP310S/1.4845 | 0.080 | 1.00 | 0.045 | 0.030 | 24.0-26.0 | 19.0-22.0 | 0.75 |
Grade | TP 304 ; TP304H ; TP304L ; TP316 ; TP316L ; TP 321 ; TP321H ; TP317L ; TP310S ; TP347H |
Standard
| ASTM A213 , ASTM A 269 , ASTM A 270 , EN10216-5 ; ASTM B 622 ; ASTM B516 ; ASTM A789 , etc |
Size | OD :3.18mm to 101.6mm |
WT : | 0.5mm to 20mm |
Length : | 12192mm |
Advantage | Superior surface finish , better mechanical property ; more precise dimension ; perfect inspection method and inspection equipment |
Application | Boiler tube applies to petroleum , chemical industry , electric power , boiler , high temperature resistant , low temperature resistant , corrosion resistant . The size can be made according to the customers requirements . High pressure boiler pipe applies to container , petrochemical and so on . Note : Generally , high pressure boiler pipe’s working pressure above 9.88Mpa and working temperature between 450 to 650 . |
Package | Plywood case |
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Welded Pipe: Welded Tube
6.35mm ASTM A269 Stainless Steel Bright Annealed Welded Tubing in Transportation
Stainless steel seamless bright annealed tube's final surface is polished and bright annealed. And the polished grade is includes 180#, 320#, 400#, 600#, 800#. According to standard very strictly, tubes which produced by us always have correct OD and WT tolerance. And they are very suitable for chro......
ASTM A249 / ASME SA249 TP304 / 304L Stainless Steel Bright Annealed Welded Tube With Cold Drawn
Stainless steel seamless bright annealed tube’s final surface is polished and bright annealed. And the polished grade is includes 180#, 320#, 400#, 600#, 800#. According to standard very strictly, tubes which produced by us always have correct OD and WT tolerance. And they are very suitable for chr......
GR2 Titanium Welded Tube, ASTM B337 High Strength for Chemical Industry
Titanium alloy has high strength and low density, good mechanical properties, toughness and corrosion resistance is very good. In addition, titanium alloys have poor process performance, cutting and processing difficulties, in hot processing, very easy to absorb impurities such as hydrogen, oxygen, ......
