English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
ASTM B168 Alloy 600 / 601 / 617 Nickel Alloy Steel Plate
| Material Grade | Alloy 601 / 625 N06600 / N06625, Alloy C276/N10276, Alloy B/UNS N10001, Alloy B-2/UNS N10665, Alloy B-3/UNS N10675, Alloy C22/UNS N06022,Alloy 800/N08800, Alloy 825/N08825, Alloy 400/N04400; etc |
| WT | <6m; >6m |
| WDT | <1200mm; >2300mm |
| Length | Normally fixed length 8m, can as per customer's requirement |
| Standard | ASTM B163; ASTM B167; ASTM B444; ASTM B622 etc. |
Alloy 601 Chemical composition
| % | Ni | Cr | Fe | C | Mn | Si | S | Al | Cu |
| min | 58.0 | 21.0 | balance | 1.00 | |||||
| max | 63.0 | 25.0 | 0.10 | 1.00 | 0.50 | 0.015 | 1.70 | 1.00 |
Alloy 600 Chemical composition
| % | Ni | Cr | Fe | C | Mn | Si | S | Cu |
| min | 72.0 | 14.0 | 6.0 | |||||
| max | 17.0 | 10.0 | 0.15 | 1.00 | 0.50 | 0.015 | 0.50 |
Physical properties
| Density | 8.47 g/cm3 |
| Melting range | 1354-1413℃ |
Features: Alloy 600 has good resistance to corrosion and high temperature, and has high strength and good fabricability. It resists chloride-ion-incurred stress corrosion cracking, sulfur compounds and oxidizing conditions at high temperatures.
Applications: Chemical process industry, heat treating fixtures, airframe components and nuclear reactors.
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Flanges: SW TH PL LJ Flanges
400LB F347 / 347H Stainless Steel Socket Welding Flange
1 . Commodity : Welding Neck , Blind , Slip On , Lap Joint , Socket Weld , Threaded , Spectacle Blind , etc 2 . Surfacing : RF , FF , RTJ 3 . Materials : Stainless Steel , Duplex Steel , etc 4 . Standards : ANSI B16.5 , ANSI B 16.47 5 . Tolerances : according to the specification or cust......
ASTM B166 Alloy 600 / 601 / 617 Nickel Alloy Round Bar
1. Grade : Alloy 625/UNS N06625, Alloy 600/UNS N06600, Alloy 601/UNS N06601,Alloy 718/UNS N07718, Alloy C276/UNS N10276, Alloy 800/UNS N08800, Alloy 825/UNS N08825,Alloy 400/UNS N04400; etc 2 . Length : As customer's requirement 3 . Standard : ASTM B335; ASTM B574; ASTM B572; ASTM B166 etc. 4. Te......
ASME / ANSI B16.5 S32205 / S31803 Stainless Steel Blind Flange RF
1 . Commodity : Welding Neck , Blind , Slip On , Lap Joint , Socket Weld , Threaded , Spectacle Blind , etc 2 . Surfacing : RF , FF , RTJ 3 . Materials : Stainless Steel , Duplex Steel , etc 4 . Standards : ANSI B16.5 , ANSI B 16.47 5 . Tolerances : according to the specification or customer's r......
ASTM B670 Alloy 718 / N07718 Nickel Allloy Sheet / Strip
1. Grade :Alloy 718 / N07718, Alloy C276/N10276, Alloy C-4/ UNS N06455,Alloy B/UNS N10001, Alloy B-2/UNS N10665, Alloy B-3/UNS N10675, Alloy C22/UNS N06022, Alloy 800/N08800,Alloy 825/N08825, Alloy 400/N04400; etc 2 . Length : As customer's requirement 3 . Standard : ASTM B333; ASTM B575; ASTM B16......Get Quote
*Your email address will not be published. Required fields are marked.
