English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
Cold Rolled Nickel Alloy Heat Exchange Seamless U Tube With Annealed
Material: Alloy 400, UNS N04400; Alloy 625, UNSN06625; Alloy 601, UNSN06601; Alloy 600, UNSN06600; Alloy 825, UNSN08825, 2.4858; Alloy 800, UNS N08800; S32750,1.4410, 2507, F53; S32205, S31803, 1.4462; 316L, 1.4401, 1.4404, 1.4435; 304L, 1.4306, S30403, 1.4307;
Get Quote
Cold Rolled Nickel Alloy Heat Exchange Seamless U Tube With Annealed
Heat Exchange Tube Process :
1 . We use Cold Drawn/cold rolled technology to produce U bend tube
2 . U bend tubes produce will accordance to customer's drawings
3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at the required flow rate
4 . The radius is checked for its OD and wall thinning with the recommended specification
5 . We'll choose three different position or as customer's require to make sure tubes quality . We'll do physical properties and micro-structure test
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test
7 . Each tube is then hydro tested at the recommended pressure to check for leakage
Grade: Alloy 600; Alloy 601; Alloy 800; Alloy 825; TP304 ; TP304H ; TP304L ; TP316 ; TP316L; S31803
Standard: ASTM B622; ASTM B516; ASTM B444; ASTM B829, etc
Size :Routine OD : 19.05mm,25.4mm,31.8mm,38.1mm
WT : 1.2-2.77mm
Length : According to customer needs up to 20m
Heat Exchange Tube Application :
a) Petroleum , chemical enterprise , super heater of boiler and heat exchanger
b) High temperature-resistant transmission fluid pipe in power station
c) Ship with pressure pipe
d) Exhaust purification device
e) Construction and ornament
f) solar industry , military , semiconductor etc
Alloy 600 Heat Exchange Tube Chemical composition:
| % | Ni | Cr | Fe | C | Mn | Si | S | Cu |
| min | 72.0 | 14.0 | 6.0 | |||||
| max | 17.0 | 10.0 | 0.15 | 1.00 | 0.50 | 0.015 | 0.50 |
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
High Durability super duplex tubing ASME SA789 S32205 Polishing
MTSCO is specialized in duplex steel pipes produce . So we know good at duplex steel knowledge . Hope the clients who are choose us can be very assured . And no need worry about our produce ability. We , MTSCO , is worth for your belived . Most of 2507 duplex steel pipes are produced by cold draw......
ASTM A213 TP304/316 Stainless Steel Straight Heat Exchanger Tube
Our heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry, water heater industry, air-conditioning industry, etc. This kind of seamless tube has a very important position in our all products....
Cold Drawn ASTM A213 S30400/S30403 Straight Heat Exchanger Tube
Our heat exchanger tubes are used in a wide range of industries such as chemical processing, hydro carbon processing, and oil refining, alternative energy, nuclear power generation, and aerospace. The stainless steel and duplex steel, nickel alloys we manufacture are high strength, corrosive ......
