English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
Nickel Alloy 625/825 Heat Exchanger Tube BA/AP Surface For Chemical Equipment
Get Quote
Nickel Alloy 625/825 Heat Exchanger Tube BA/AP Surface For Chemical Equipment
Grade: Alloy 625; Alloy 600; Alloy 601; Alloy 800; Alloy 825; TP304 ; TP304H ; TP304L ; TP316 ; TP316L; S31803
Standard: ASTM B622; ASTM B516; ASTM B444; ASTM B829, etc
Size :Routine OD : 19.05mm,25.4mm,31.8mm,38.1mm
WT : 1.2-2.77mm
Length : According to customer needs up to 20m
Heat Exchange Tube Production Process :
1 . We use Cold Drawn technology to produce U bend tube
2 . U bend tubes produce will accordance to customer's drawings
3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at the required flow rate
4 . The radius is checked for its OD and wall thinning with the recommended specification
5 . We'll choose three different position or as customer's require to make sure tubes quality . We'll do physical properties and micro-structure test
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test
7 . Each tube is then hydro tested at the recommended pressure to check for leakage
Heat Exchange Tube Application :
a) Petroleum , chemical enterprise , super heater of boiler and heat exchanger
b) High temperature-resistant transmission fluid pipe in power station
c) Ship with pressure pipe
d) Exhaust purification device
e) Construction and ornament
f) solar industry , military , semiconductor etc
Nickel Alloy 625 Heat Exchange Tube Chemical composition:
| % | Ni | Cr | Mo | Fe | C | Mn | Si | P | S | Co | Nb+Ta | Al | Ti |
| min | 58.0 | 20.0 | 8.0 | 3.15 | |||||||||
| max | 23.0 | 10.0 | 5.0 | 0.10 | 0.50 | 0.50 | 0.015 | 0.015 | 1.00 | 4.15 | 0.40 | 0.40 |
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
PE ASTM A790 Stainless Duplex Steel Pipe Seamless 6000MM
Duplex stainless steel was developed to combat common corrosion problems encountered with the 300 series stainless steels. “ Duplex ” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The advantage of a duplex str......
SAF2507 / 1.4410 Duplex Steel Tube, 1 / 2 Inch 12SWG For Pipelines
Material Grade: S32205 , S31803 , S32304 , S32750 , F51 , F53 , 2205 , 2507 etc Outer Diameter: 3.18mm - 101.6mm Wall Thickness: 0.5mm - 20mm Length: Normally fixed length 6m , can as per customer’s requirement Standard： ASTM A789 ; ASTM A790 ; EN 10216-5 ect . Process Method：Cold Drawn or C......
TP316L U Bend Tube With Low Price, Heat Exchanger Tube
Our heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products . Process : 1 . We use Cold Drawn......
